RL600 ROTATIVE DRILL WITH EXTRACTION
TUBES FOR HAMMER DRILLING AND HELICOIDAL DRILLING


ROTATION HEAD
· Axial Diameter_ 101 mm.
· Rotation Speed from 0 to 900 r.p.m variable from control panel (optional 1500 r.p.m)
· Maximum Torque 650 Kg.
· Hydraulic opening of the head setting free the drilling area.
 
HIDRAULIC CLAMP
· Installed in head, with capacity of linkage until (HQ) 90 mm.
 
HIDRAULIC RETAINER
· Retention capacity until 200 mm. (another type of retainer is optional)
· With double unscrewing of tubes retainer.
 
MAST
· Actioned by hydraulic cylinder and chain.
· Hydraulic elevation and flip-top.
· Positioning for inclined perforation in the direction of the axis.
· Telescopic set of pulleys for maneuver of 6 meters.
· Run of head 3.500 mm.
· Maximum Traction 12.000 Kg.
· Regulated Thrust from 0 to 4.000 Kg.
· Longitudinal sliding 800 mm.
 
CONTROL PANEL
· Centralized with complete hydraulic system which can regulate the advance speed and the force of thrust or retention.
· Controls for information of rotation, thrust and injection pump.
 
PRINCIPAL CATHAED
· For maneuvers with capacity of 3500 Kg in direct pull.

AUXILIAR WIRE LINE CATHAED
· Capacity of 1000 Kg
· Capacity for 400mt.of cable with diameter of 6mm.

MUD INJECTION PUMP
· Triplex, hydraulic actioned.
· Regulated flow from 0 to 200 l.p.m.
· Regulated pressure from 0 to 45 Bar.
 
ENGINE 
· Deuzt D914L06 Engine Power :117 CV , 2300 r.p.m.
 
AUTOMATIC BEATING UNIT ML-60
· Installed in the drill.
· Beating hammer weight 63,5 Kg.
· Fall height 76 cm.
· Electronic beat counter.
· Fulfills the following norms NI of SIMSFE:
    DPSH. Dinamic Proof Super Heavy
    SPT. Standard Penetration Test
· Fulfills the norm UNE 103-801-94
· Adjustable beating regime between 20 and 30 beats p.m.
· Positioning from control panel.

ASSEMBLY OF THE DRILL
· On metalic track covered with rubber.
· Aproximated weigth of the drill 6.000 Kg.

This equipment here described FULFILLS the norms of MOPTMA (Spanish Department of Public Works Transport and Environment) for the accreditation in the area of capture of inaltered samples, tests and proofs “in situ” in soils, governed for the European Norm UNE 103-800-92 (Geotechnics, Test in situ, Standard Penetration Test SPT).