|DRILLING DEPTH||100 – 150 mts.|
|DRILLING DIAMETERS||Up to 146 mm with conventional drilling system|
|ENGINE||DIESEL – CATERPILLAR C2.2 IND 60 BHP (44.7 kW) at 2,800 r.p.m. with the assembly of hydraulic pumps.|
|ROTATION HEAD||- 90mm. pitch striated hollow shaft|
|ROTATION SPEED||-From 0 to 700 r.p.m|
-Variable control from the control panel
|MAXIMUM TORQUE||400 Kgm|
|HYDRAULIC CLAMP||-Installed on head|
- 90mm (HQ) diameter rod capacity
|HYDRAULIC RETAINER||- Guide and retention capacity up to 150 mm|
- Dual retainer releaser (OPTIONAL)
|HEAD TRAVEL||1.800 mm.|
|MAXIMUM TRACTION||6.000 Kg.|
|THRUST||Adjusted from 0 to 2.500 Kg.|
|DRILLING ANGLE||Vertical 90 °|
|CONTROL PANEL||Centralised with full hydraulic system and adjustable speed of advance and thrust or retention force|
|WINCH||1,000 kg capacity in direct pull|
|MAST EXTENSION||Supplement for 3 m (4.5 m) operations|
|WIRE LINE WINCH|
|- 1,000 kg capacity in direct pull|
- 200 mts. of cable Ø 6mm.
|LEVELING||Four cylinders with adjustable plate and control by check valves|
|WATER PUMP||- Regulated flow from 0 to 90 l.p.m.|
- Regulated pressure from 0 to 40 bar.
|SPT BEATING UNIT||-Installed on the equipment|
- Self-operated without a winch
-Beating hammer weight 63,5 Kg.
-Free fall height 76 cm.
-Electronic digital beat counter
-Adjustable beating regime between 20 and 30 beats p.m.
- Complies with the UNE-EN-ISO 22476-2: 2008 standard