ROLATEC RL-45

PERFORADORA ROTATIVA PARA SONDEOS CON TUBOS TESTIGOS, MARTILLO DE FONDO Y BARRENA HELICOIDAL

Rolatec RL-45
Descargar Ficha RL-45
DESCRIPTIONTECHNICAL SPECIFICATIONS RL-45
DRILLING DEPTH - 100 - 150 m
DRILLING DIAMETERS - Up to 146 mm with conventional drilling system
ENGINE - DIESEL – CATERPILLAR C2.2 IND 60 BHP (44.7 kW) at 2,800 r.p.m. with the assembly of hydraulic pumps.
ROTATION HEAD - 90mm. pitch striated hollow shaft
ROTATION SPEED - From 0 to 700 r.p.m
- Variable control from the control panel
MAXIMUM TORQUE - 450 Kgm
HYDRAULIC CLAMP - Installed on head
– 90mm (HQ) diameter rod capacity
HYDRAULIC RETAINER - Guide and retention capacity up to 150 mm
– Dual retainer releaser (OPTIONAL)
HEAD TRAVEL - 1.800 mm
MAXIMUM TRACTION - 6.000 Kg
THRUST- Adjusted from 0 to 2.500 Kg.
DRILLING ANGLE - Vertical 90 °
CONTROL PANEL - Centralised with full hydraulic system and adjustable speed of advance and thrust or retention force
WINCH - 1,000 kg capacity in direct pull
MAST EXTENSION - Supplement for 3 m (4.5 m) operations
WIRE LINE WINCH
(OPTIONAL)		- 1,000 kg capacity in direct pull
– 200 mts. of cable Ø 6mm.
LEVELING- Four cylinders with adjustable plate and control by check valves
WATER PUMP - Regulated flow from 0 to 90 l.p.m.
– Regulated pressure from 0 to 40 bar.
SPT BEATING UNIT - Installed on the equipment
– Self-operated without a winch
- Beating hammer weight 63,5 Kg.
- Free fall height 76 cm.
- Electronic digital beat counter
- Adjustable beating regime between 20 and 30 beats p.m.
– Complies with the UNE-EN-ISO 22476-2: 2008 standard
WEIGHT- 2.450 Kg
On Tuesday April 23rd, 2019   /   Geotecnia